LINE SET COVERS
Line set covers
Coordinate exterior line routing with cover sections and fittings. Explore color options and confirm the right components for your job.
View line set covers ↗FOR HVAC CONTRACTORS
Installation supplies for the whole job.
Explore the materials that help complete a heat-pump installation. This is a product-line preview, with no online pricing or live inventory displayed.
SUPPLY CATEGORIES
Explore the essentials
Send a materials list or job requirements and we can discuss sizes, compatibility, and availability.
Showing all 6 categories
REFRIGERANT PIPING
Line sets
Browse the 18 manufacturer-listed line-set sizes below: insulated twin sets, individual insulated lines, and bare copper. Confirm equipment fit and stock before ordering.
See line-set details ↓
EQUIPMENT SUPPORT
Mustang mini-split stand
Adjustable, pre-galvanized stand for outdoor condensers, heat pumps, and mini-splits at ground level or on a flat roof. Four non-penetrating rubber bases; 34 lb assembled product weight. Confirm equipment fit and load before ordering.
See stand specifications ↓
MINI-SPLIT WIRE
14/4 stranded mini-split cable
OEM part number: 58225703. Southwire 250-ft black reel with four 14 AWG stranded bare-copper conductors, rated 600 V. Type TC-ER tray cable; VW-1 flame-rated and suitable for wet or dry locations. Confirm the equipment wiring diagram, code requirements, and compatibility before installation.
Ask about this wire ↗
MINI-SPLIT WIRE
Genesis 14/4 mini-split tray cable
OEM part number: 10700108. 250-ft reel of black-jacketed, unshielded cable with four 14 AWG, 19-strand bare-copper conductors (black, white, red, and green). THHN PVC/nylon conductor insulation and a PVC outer jacket; nominal outside diameter 0.390 in.
Rated 600 V, Type TC-ER-JP, FT4; UL listed under UL 1277. Sunlight resistant, direct-burial rated, and Oil Res I. Temperature range: −20°C to 90°C dry / 75°C wet. Confirm the equipment wiring diagram and applicable electrical code before specifying or installing.
Ask about this wire ↗
EQUIPMENT SUPPORT
36-inch steel wall brackets
Two-piece, powder-coated 10-gauge steel triangular brackets for mini-split condensers and heat pumps. Rated to support up to 600 lb per pair.
See bracket specifications ↓
MISCELLANEOUS ACCESSORIES
Novair A/C disconnect switch box
Part number: PDS-60AN. 60A non-fused pullout disconnect in a light-gray metallic NEMA 3R outdoor enclosure; listed 240 VAC, single phase. Confirm electrical ratings, code requirements, and equipment compatibility with a qualified installer.
Ask about this item ↗OUTDOOR EQUIPMENT SUPPORT
Mustang mini-split stand
A quick-assembly, strut-based support for outdoor condensers, ductless heat pumps, and AC units. Model RTSEQ-MUSTANG-PG is the pre-galvanized, non-penetrating rubber-base configuration; direct mounting is a separate option.
- Application
- Ground-level or flat-roof installations
- Product weight
- 34 lb
- Adjustable clearance
- 9–18 in. mounting height
- Mounting rails
- Adjustable spacing to fit the equipment footprint
- Framing
- 1⅝ × 13⁄16 in., 14-gauge slotted strut channel; bent and perforated square tubing
- Finish
- Pre-galvanized framing (ASTM A653); electro-galvanized hardware (ASTM B633)
- Bases
- Non-penetrating, anti-slip recycled-rubber supports
- Assembly
- Pre-attached hardware; standard wrench only. Join a crossmember to each pair of base assemblies, then connect the two sides with the remaining crossmembers.
- Unit / item code
- Each · RTSEQ-MUSTANG-PG
Load rating: verify before specifying
The product listing states 300 lb in its overview and feature list, while its technical submittal states a 400 lb maximum. Use 300 lb as a conservative planning figure and confirm the current rated configuration, equipment footprint, anchoring, roof conditions, and any wind or seismic requirements before installation.
Ask about this stand ↗Catalog preview only. Availability and compatibility are confirmed per inquiry.OUTDOOR EQUIPMENT SUPPORT
36-inch steel wall-mounted brackets
Two-piece, powder-coated triangular brackets designed to support mini-split condenser and heat-pump units on a wall. Capacity and fit depend on the mounting structure, fasteners, and equipment footprint.
- Application
- Wall-mounted mini-split condenser and heat-pump units
- Bracket length
- 36 in.
- Maximum equipment depth
- 27 in. (per supplied dimension image)
- Load capacity
- Up to 600 lb per pair
- Construction
- Two-piece triangular brackets made from 10-gauge steel
- Finish
- Powder-coated
Confirm the mounting conditions
The stated 600 lb capacity is for a pair of brackets. Verify the wall structure, approved fasteners, bracket spacing, equipment footprint, clearances, and current manufacturer instructions before installation.
Ask about these wall brackets ↗Catalog preview only. Confirm current availability and specifications with our supply team.MANUFACTURER-LISTED OPTIONS
Line sets by size
All dimensions and lengths below are drawn from Novair’s accessory catalog. Photos are manufacturer-provided and may not show the exact size of the item. No prices are displayed.
White insulated twin line sets
50 FT · INSULATED COPPER
1/4 × 3/8 in. line set
White, pre-insulated twin copper tubing; supplied unflaired for field connections.
Ask about this item ↗50 FT · INSULATED COPPER
1/4 × 1/2 in. line set
White insulated twin line set; confirm the required liquid and suction-line sizes for your system.
Ask about this item ↗
50 FT · INSULATED COPPER
3/8 × 5/8 in. line set
White insulated twin line set; check the selected unit’s piping specifications before ordering.
Ask about this item ↗
164 FT · INSULATED COPPER
1/4 × 3/8 in. line set
Long-run white insulated twin line set; verify maximum allowed line length for the matched equipment.
Ask about this item ↗164 FT · INSULATED COPPER
1/4 × 1/2 in. line set
Long-run white insulated twin line set; confirm equipment sizing and installation limits.
Ask about this item ↗164 FT · INSULATED COPPER
3/8 × 5/8 in. line set
Long-run white insulated twin line set; confirm equipment sizing and installation limits.
Ask about this item ↗Individual white insulated lines
50 FT · WHITE INSULATED
3/8 in. line
Single insulated copper line, as listed in the Novair accessory catalog.
Ask about this item ↗50 FT · WHITE INSULATED
3/4 in. line
Single insulated copper line, as listed in the Novair accessory catalog.
Ask about this item ↗50 FT · WHITE INSULATED
7/8 in. line
Single insulated copper line, as listed in the Novair accessory catalog.
Ask about this item ↗164 FT · WHITE INSULATED
1/4 in. line
Single insulated copper line; verify the applicable installation length and sizing limits.
Ask about this item ↗164 FT · WHITE INSULATED
3/8 in. line
Single insulated copper line; verify the applicable installation length and sizing limits.
Ask about this item ↗164 FT · WHITE INSULATED
1/2 in. line
Single insulated copper line; verify the applicable installation length and sizing limits.
Ask about this item ↗164 FT · WHITE INSULATED
5/8 in. line
Single insulated copper line; verify the applicable installation length and sizing limits.
Ask about this item ↗164 FT · WHITE INSULATED
3/4 in. line
Single insulated copper line; verify the applicable installation length and sizing limits.
Ask about this item ↗Bare copper lines
50 FT · BARE COPPER
3/8 in. line
Uninsulated copper tubing; select insulation appropriate to the application and local code.
Ask about this item ↗50 FT · BARE COPPER
5/8 in. line
Uninsulated copper tubing; confirm equipment fit and required insulation.
Ask about this item ↗50 FT · BARE COPPER
3/4 in. line
Uninsulated copper tubing; confirm equipment fit and required insulation.
Ask about this item ↗50 FT · BARE COPPER
7/8 in. line
Uninsulated copper tubing; confirm equipment fit and required insulation.
Ask about this item ↗Product options and representative images adapted from Novair’s manufacturer accessory catalog. Availability at Novair HVAC Supply New England is not confirmed by this listing.
Product details are confirmed per inquiry
Our catalog is being built. Listed categories and line-set options do not guarantee local stock on a particular date. Confirm model fit, dimensions, current specifications, and pickup or shipping arrangements with the supply team.
BUILD YOUR MATERIALS LIST
Tell us about the install.
Include your company, equipment model, job location, quantities, dimensions, and target date. We’ll help identify the supplies to discuss.
Match supplies to your equipment
Confirm line-set diameters, allowable lengths and mounting clearances in the Novair model specifications. If you’re new to Novair, register your HVAC business before requesting contractor pricing.